511MLFT

511MLFT Overview

The Tape and Reel method is used for packaging clock ICs. This clock generator is embedded in the SOIC N package. As you can see, it consists of 8 terminations. A voltage of 5V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. An upper frequency limit of 200MHz Max can be achieved with this clock-based frequency synthesizer. Microprocessors are specifically designed to use this clock-generating IC, which has a 8-bit output. There is an available 8 pin on the PLL. Featuring an impressive low-temperature operating performance and 0°C functions, this clock generator is sure to impress. At 70°C, this RF synthesizer remains functional despite reduced performance. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. 1 signal outputs enable clock PLL to magnify output frequency as high as possible. To supply this clock PLL, a voltage higher than 5.25V is unacceptable. For this clock generator ic, 3.135V is the lowest allowable supply voltage. For its full function, a supply current of 8mA is required.

511MLFT Features

Available in the SOIC N
Supply voltage of 5V
Operating supply voltage of 3.3V

511MLFT Applications

There are a lot of Integrated Device Technology (IDT) 511MLFT Clock Generators applications.

• Bit synchronization
• 10 Gigabit Ethernet
• PCI express cards
• Broadcast communication
• Carrier synchronization in wired communication
• Microprocessor clock multipliers
• Medical equipment
• Computers to manage memory cards
• Signal demodulation
• Pagers