501GLF

501GLF Overview

In order to package it as a clock IC, the Rail/Tube package is used. As part of the TSSOP package, this clock generator is embedded. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 8 terminations in this file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be Clock. Providing a maximum frequency of 160MHz, this clock-based RF synthesizer is suitable for a variety of applications. The clock-generating IC is a 8-bit device designed specifically for microprocessors. There is an available 8 pin on the clock generators. Electronic frequency generator can operate at low temperatures and can perform 0°C operations at a time. At 70°C, this RF synthesizer remains functional despite reduced performance. In terms of the supply voltage, PLL clock can handle 5V volts. This clock PLL features ALSO OPERATES AT 5V SUPPLY for better clock signal output. 1 signal outputs are provided for enhancing output frequency as much as possible. This clock generator cannot be powered by voltages higher than 5.25V. The lowest limit of supply voltage for this RF synthesizer is 3V. To fully perform its function, time clock generator requires a supply current of 20mA.

501GLF Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 5V

501GLF Applications

There are a lot of Integrated Device Technology (IDT) 501GLF Clock Generators applications.

• Microwave point-to-point systems
• Integrated phase noise in aerospace systems
• Walkie-talkies
• Remote telemetry and instrumentation
• Aerospace and defense
• Wireless handsets
• Line cards used in telephone exchange
• Automatic control system test
• Coherent carrier tracking
• Clock recovery