307G-03LF

307G-03LF Overview

TSSOP contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 16 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. RF synthesizers based on this clock provide frequencies up to 270MHz maximum. Clock PLL is equipped with 16 pin count. There is a 16 pin that is available on the digital clock generator. This clock generator ic has an impressive low-temperature operating performance and is capable of 0°C operations. At a temperature of 70°C, the clock generator ic can operate with attenuated performance. Time clock generator is capable of handling a voltage of 3.3V. There can be no voltage higher than 3.6V when powering this frequency generator. Clock PLL operates with the minimal supply voltage of 3V. It is able to realize high efficiency when operating at a frequency of 270MHz.

307G-03LF Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

307G-03LF Applications

There are a lot of Integrated Device Technology (IDT) 307G-03LF Clock Generators applications.

• Coherent carrier tracking
• Main oscillator in receiver
• CPUs
• 1 Gigabit Ethernet
• Local oscillator source in receiver
• Medical equipment
• FMCW Radar
• Precision auxiliary angle deflection measurement
• Carrier synchronization in wired communication
• Fiber Channel