2N5060

2N5060 Overview

Powered by 510A, this device supports maximum on-state current.Despite its direction, the RMS current (Irms) describes the average strength of the current.Maintaining the RMS on-state current under 0.8A is essential for the device's normal operation.In this device, the repetitive peak off-state voltage is 30V. This is the maximum voltage allowed across the device.The?holding current?(hypostatic) for electrical, electromagnetic, and electronic devices is the minimum current which must pass through a circuit in order for it to remain in the 'ON' state, and its current can be 5mA.Thyristors have a forward voltage of 1.7V, which is the amount of voltage required to get current flowing across a diode.Insulation effectiveness can be determined by the leakage current, and its maximum leakage current can be 0.01mA.An unblocked (On) state is converted into a blocked (Off) state by gate trigger current. This device has a DC gate trigger current-Max of 0.2mA.

2N5060 Features

its RMS current (Irms) is 800mA
the repetitive peak off-state voltage of this device is 30V
its current can be 5mA
this thyristors has 1.7V forward voltage
its maximal leakage current can be 0.01mA

2N5060 Applications

There are a lot of Central Semiconductor 2N5060 applications of SCRs thyristors.

• DC motor controls - AC motor controls
• Power converters
• Wind mill
• Lighting control
• Uninterruptable power supplies
• Welders
• Motor starters
• DC motor control and drives
• Battery charges
• Heat and temperature control