23S08-1DCG8

23S08-1DCG8 Overview

As a clock IC, PLLs is packaged using the Tape and Reel method. In the SOIC package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. It contains a total of 16 terminations within RF synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVTTL is designed for clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 133.3MHz. Microprocessor-specific clock PLL with 16 bits. There are 16 pins that are available on the clock PLL. Despite its low operating temperature, this clock generator has 0°C operations. There is even a possibility that this clock generator ic will last even when the temperature is 70°C. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Clock Drivers-type frequency generators are usually classified as this type. There is a low timing skew at 0.2 nsmax with this RF synthesizer. There are 8 pins configured for enabling high true outputs on this clock generator. If you search for the 23S family of parts, you will be able to find similar electrical parts. It is unacceptable to supply this clock PLL with a voltage higher than 3.6V. The lowest limit of supply voltage for this RF synthesizer is 3V. PLL BASED CLOCK DRIVER logic circuits mainly utiliPLL BASED CLOCK DRIVERe this time clock generator.

23S08-1DCG8 Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

23S08-1DCG8 Applications

There are a lot of Integrated Device Technology (IDT) 23S08-1DCG8 Clock Generators applications.

• Wireless base station for LTE, LTE-advanced
• Closed circuit systems
• Modems
• Clock generation systems
• Local oscillators (LOs)
• Mechanical devices
• Pagers
• Multiplexing communication
• FSK demodulators
• Pulsed digital systems