23S05E-1HDCG

23S05E-1HDCG Overview

As part of the SOIC N package, this clock generator is embedded. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. In it, there are 8 terminations to be found. This electronic frequency generator requires a voltage of 3.3V. In this case, LVTTL is designed to be the input of the clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This clock-based frequency generator provides a frequency up to 200MHz Max. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. A 8 pin is available on the clock PLL. A frequency generator with 0°C operations has an impressive low-temperature performance. With attenuated performance, this RF synthesizer can survive at 70°C. There is a maximum supply voltage of 3.3V that clock generator can handle. As a result, it is commonly classified as a type of Clock Drivers clock PLL. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. You can find similar clock generators by searching for the 23S family. It is unacceptable to supply this clock PLL with a voltage higher than 3.6V. For this clock generator ic, 3V is the lowest allowable supply voltage. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device.

23S05E-1HDCG Features

Available in the SOIC N
Supply voltage of 3.3V
Operating supply voltage of 3.3V

23S05E-1HDCG Applications

There are a lot of Integrated Device Technology (IDT) 23S05E-1HDCG Clock Generators applications.

• Sampling clocks for ADC and DAC
• Main oscillator in receiver
• Precision auxiliary angle deflection measurement
• Modems
• 1 Gigabit Ethernet
• Peripheral devices
• Signal analyzer
• Digital logic circuits
• Bit synchronization
• Pulsed digital systems