23S05E-1DCGI8

23S05E-1DCGI8 Overview

Tape & Reel (TR)-method packaging is used for clock ICs. This clock generator is embedded in the SOIC package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result of this, we can find 8 terminations. This electronic frequency generator requires a voltage of 3.3V. LVTTL is designed as this clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. The clock-generating IC is a 8-bit device designed specifically for microprocessors. There is an available 8 pin on the clock generators. Designed to operate at low temperatures, this frequency generator performs -40°C operations per second. Despite its attenuated performance, this frequency synthesizer can last at 85°C. Time clock generator can handle a voltage of 3.3V as the supply voltage. Low timing skew is provided by this analog clock generator at maximum 0.25 ns. There are 4 true outputs. When searching for parts of the 23S family, similar frequency generators will be found. This electronic frequency generator is mainly used to make up PLL BASED CLOCK DRIVER logic circuits.

23S05E-1DCGI8 Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs

23S05E-1DCGI8 Applications

There are a lot of Integrated Device Technology (IDT) 23S05E-1DCGI8 Clock Generators applications.

• Picocells, femtocells and small cells
• Mixed mode (analog and digital) applications
• Frequency synthesis
• Microwave backhaul IF
• Motor speed controls
• Signal modulation and demodulation
• Main oscillator in receiver
• Broadcast communication
• Local oscillator source in receiver
• Jitter reduction