23S05E-1DCG8

23S05E-1DCG8 Overview

Clock generator is packaged in the way of Tape and Reel. SOIC contains this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. It contains a total of 8 terminations within RF synthesizer. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called LVTTL which is designed to be the input to this clock generator. To access the electronic component's full performance, 1 circuits are implemented. It provides a maximum frequency of 200MHz. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. The frequency generator is equipped with 8 pins. The operating temperature should be higher than 0°C. The operating temperature should be lower than 70°C. PLL clock can handle a voltage of 3.3V as its supply voltage. The timing skew of this frequency synthesizer is low at 0.25 nsmax. 4 pins enable the digital clock generator's true output. When searching for parts of the 23S family, similar frequency generators will be found. There can be no voltage higher than 3.6V when powering this frequency generator. With this clock generator, the supply voltage is limited to 3V. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator.

23S05E-1DCG8 Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs

23S05E-1DCG8 Applications

There are a lot of Integrated Device Technology (IDT) 23S05E-1DCG8 Clock Generators applications.

• Small signal recovery
• Infotainment systems
• Wireless infrastructure
• Fiber Channel
• Digital circuits
• Automatic test equipment
• Electronic equipment
• Signal demodulation
• Integrated phase noise in aerospace systems
• Mixed mode (analog and digital) applications