2308A-1HPGGI8

2308A-1HPGGI8 Overview

It is packaged using the Tape and Reel method since it is a clock IC. This clock generator is embedded in the TSSOP package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As a result of this, we can find 16 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVTTL. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 133.3MHz. Microprocessor-specific clock PLL with 16 bits. There is an available 16 pin on the clock generators. A frequency generator with -40°C operations has an impressive low-temperature performance. This RF synthesizer can last with attenuated performance at 85°C. PLL clock can handle a voltage of 3.3V as its supply voltage. Fundamentally, this is a kind of Clock Drivers clock PLL. This clock generator cannot be powered by voltages higher than 3.6V. With this clock generator, the supply voltage is limited to 3V.

2308A-1HPGGI8 Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

2308A-1HPGGI8 Applications

There are a lot of Integrated Device Technology (IDT) 2308A-1HPGGI8 Clock Generators applications.

• Integrated phase noise in aerospace systems
• Myriad digital applications
• Coherent carrier tracking
• Wireless infrastructure
• Local oscillators (LOs)
• Televisions
• PCI express cards
• Multi-function printers
• Closed circuit systems
• CB radios