2308A-1HPGG8

2308A-1HPGG8 Overview

As a clock IC, PLLs is packaged using the Tape and Reel method. The TSSOP package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 16 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. An up to 133.3MHz frequency is provided by this clock-based RF synthesizer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The frequency synthesizer has 16 pins that are available. There are 0°C operations available on this frequency generator and it operates at low temperatures. The operating temperature should be lower than 70°C. In terms of the supply voltage, analog clock generator can handle 3.3V volts. Fundamentally, this is a kind of Clock Drivers clock PLL. A voltage exceeding 3.6V is not acceptable for supply to this frequency generator. Clock PLL operates with the minimal supply voltage of 3V.

2308A-1HPGG8 Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

2308A-1HPGG8 Applications

There are a lot of Integrated Device Technology (IDT) 2308A-1HPGG8 Clock Generators applications.

• High-speed communication applications
• Signal generator
• Line cards used in telephone exchange
• Clock synchronization
• Electronic equipment
• VSAT (Small Ground Satellite Station)
• Communication infrastructure
• Sampling clocks for ADC and DAC
• Signal analyzer
• Microwave radio