2308A-1DCG

2308A-1DCG Overview

As a clock IC, it is packaged by the Rail/Tube method. Embedded in the SOIC package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are 16 terminations found in the file. This time clock generator should be voltaged at 3.3V. In this clock generator, LVTTL is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This clock-based frequency generator provides a frequency up to 133.3MHz Max. It is a 16-bit IC that is designed for microprocessors specifically. There are 16 pins that are available on the frequency generator. Designed to operate at low temperatures, this frequency generator performs 0°C operations per second. There is even a possibility that this clock generator ic will last even when the temperature is 70°C. Supply voltage 3.3V is what time clock generator can handle. And basically, this clock generator is often classified as a kind of Clock Drivers. At 0.2 ns Max, this analog clock generator exhibits low timing skew. A analog clock generator with 8 true output enable pins is configured for this application. The 2308 family of parts can be used to find electric parts that are similar to each other. To supply this clock PLL, a voltage higher than 3.6V is unacceptable. Clock PLL operates with the minimal supply voltage of 3V. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator.

2308A-1DCG Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

2308A-1DCG Applications

There are a lot of Integrated Device Technology (IDT) 2308A-1DCG Clock Generators applications.

• FSK demodulators
• Frequency synthesis
• Microwave radio
• Signal demodulation
• Microprocessor clock multipliers
• Ports
• Clock recovery
• Radiotelephones
• FPGA and processor clocks
• Time to digital converters