2308-5HPGG8

2308-5HPGG8 Overview

Tape and Reel-method packaging is used for clock ICs. TSSOP contains this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 16 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVTTL. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. It is a 16-bit clock PLL designed specifically for microprocessors. There is an available 16 pin on the PLL. There are 0°C operations that can be performed on this clock generator, which has impressive low-temperature performance. There is still a possibility of the electronic frequency generator working at 70°C with attenuated performance. There is a maximum supply voltage of 3.3V that clock generator can handle. As a result, it is commonly classified as a type of Clock Drivers clock PLL. There is a low timing skew at 0.2 nsmax with this RF synthesizer. 8 pins enable the digital clock generator's true output. When searching for parts of the 2308 family, similar frequency generators will be found. There can be no voltage higher than 3.6V when powering this frequency generator. The lowest limit of supply voltage for this RF synthesizer is 3V. This electronic frequency generator is mainly used to make up PLL BASED CLOCK DRIVER logic circuits.

2308-5HPGG8 Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

2308-5HPGG8 Applications

There are a lot of Integrated Device Technology (IDT) 2308-5HPGG8 Clock Generators applications.

• Cell phones
• Antenna automatic tracking
• Radio receivers
• Clock synchronization
• FMCW Radar
• Ultrasound diagnosis
• Microwave backhaul IF
• Motor speed controls
• Wireless infrastructure
• Jitter reduction