2308-3DCG

2308-3DCG Overview

The SOIC package embeds this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 16 terminations found in this file. Clock generator ics require a voltage of 3.3V. A clock generator's input is called LVTTL and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. The frequency generator has a maximum frequency of 133.3MHz. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. There is an available 16 pin on the PLL. Electronic frequency generator can operate at low temperatures and can perform 0°C operations at a time. At a temperature of 70°C, the clock generator ic can operate with attenuated performance. The supply voltage should be maintained at 3.3V for high efficiency. Clock Drivers-type frequency generators are usually classified as this type. Clock PLL is configured with 8 output. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. There is no point in supplying this frequency generator with a voltage higher than 3.6V. For this clock generator ic, 3V is the lowest allowable supply voltage. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator. Time clock generator requires a supply current of 45mA to fully function.

2308-3DCG Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V

2308-3DCG Applications

There are a lot of Integrated Device Technology (IDT) 2308-3DCG Clock Generators applications.

• Televisions
• Antenna automatic tracking
• Wide area power system
• Space communucation
• Cellular/4G
• Jitter reduction
• Digital switching systems
• Radio receivers
• Microwave backhaul IF
• Carrier synchronization in wired communication