2308-2HPGG

2308-2HPGG Overview

The TSSOP package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result of this, we can find 16 terminations. This clock generator ic should receive a voltage of 3.3V. This clock generator receives its inputs from LVTTL, which is designed to be the clock source. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.3MHz. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. There are 16 pins that are available on the clock PLL. Despite its low operating temperature, this clock generator has 0°C operations. There is even a possibility that this clock generator ic will last even when the temperature is 70°C. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. The clock PLL is generally classified as a Clock Drivers device. There is a low timing skew at 0.2 nsmax with this RF synthesizer. A analog clock generator with 8 true output enable pins is configured for this application. By searching for the 2308 family, it is possible to find similar electrical components. It is unacceptable to supply this clock PLL with a voltage higher than 3.6V. The lowest limit of supply voltage for this RF synthesizer is 3V. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator.

2308-2HPGG Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

2308-2HPGG Applications

There are a lot of Integrated Device Technology (IDT) 2308-2HPGG Clock Generators applications.

• Ports
• Remote telemetry and instrumentation
• Computers to manage memory cards
• FPGA and processor clocks
• Coherent detection of the signal
• Jitter reduction
• Deep space exploration
• Automatic control system test
• Tracking filters
• Carrier synchronization in wired communication