2308-1HDCG8

2308-1HDCG8 Overview

As a clock IC, PLLs is packaged using the Tape and Reel method. As part of the SOIC package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. It is a 16-bit clock PLL designed specifically for microprocessors. There are 16 pins that are available on the frequency generator. There are 0°C operations available on this frequency generator and it operates at low temperatures. The operating temperature should be lower than 70°C. Electronic frequency generator can handle voltages up to 3.3V. The device is usually classified as a type of Clock Drivers device. There is a low timing skew at 0.2 nsmax with this RF synthesizer. 8 high true output enable pins are available on this clock generator. A search for the 2308 family will yield similar electronic components. It is unacceptable to supply this clock PLL with a voltage higher than 3.6V. Its lowest supply voltage is 3V. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER.

2308-1HDCG8 Features

Available in the SOIC
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

2308-1HDCG8 Applications

There are a lot of Integrated Device Technology (IDT) 2308-1HDCG8 Clock Generators applications.

• Antenna automatic tracking
• Wi-Fi routers
• Satellite navigation communication
• DVD recorders
• PMR (Professional Mobile Radio)
• Automatic control
• Closed circuit systems
• Coherent carrier tracking
• 1 Gigabit Ethernet
• Laptops