1527G-110LF

1527G-110LF Overview

There is a clock generator embedded in the TSSOP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 16 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by LVTTL as its input. To access the full performance of the electronic component, 1 circuits are implemented. Providing a maximum frequency of 110MHz, this clock-based RF synthesizer is suitable for a variety of applications. Clock PLL is equipped with 16 pin count. PLL is designed with 16 pins. Electronic frequency generator can operate at low temperatures and can perform 0°C operations at a time. At 70°C, this RF synthesizer remains functional despite reduced performance. The supply voltage should be maintained at 3.3V for high efficiency. There are 2 pins that are configured to enable high true output on this analog clock generator. To supply this clock PLL, a voltage higher than 3.6V is unacceptable. This clock generator ic requires a voltage supply no lower than 3V. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device.

1527G-110LF Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
2 true outputs

1527G-110LF Applications

There are a lot of Integrated Device Technology (IDT) 1527G-110LF Clock Generators applications.

• Modems
• Phase modulation cellular systems
• Frequency synthesis
• Microprocessor clock multipliers
• Closed circuit systems
• Cable television converter boxes
• CPUs
• Signal modulation and demodulation
• Jitter reduction
• Fiber Channel