Products
Manufacturer
RFQ
NEWS
ContactDG611AEQ-T1-E3
55ns, 35ns SPST - NC 115Ohm Analog Switches DG611 16 Pins 100pA 16-TSSOP (0.173, 4.40mm Width)
- Manufacturer: Vishay Siliconix
- NO: 880-DG611AEQ-T1-E3
- Package: 16-TSSOP (0.173, 4.40mm Width)
- Datasheet:
- Stock: 3317
- Description: 55ns, 35ns SPST - NC 115Ohm Analog Switches DG611 16 Pins 100pA 16-TSSOP (0.173, 4.40mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Power Dissipation | 450mW |
| Max Supply Current | 100μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 55 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±2.7V~5V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 35 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 720MHz |
| On-State Resistance (Max) | 115Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 55ns, 35ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -90dB @ 10MHz |
| Height | 920μm |
| Length | 5.08mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 72Ohm |
| Max Power Dissipation | 450mW |
| Base Part Number | DG611 |
| Pin Count | 16 |
DG611AEQ-T1-E3 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NC switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with DG611. Analog switches have 72Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2.7V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. A voltage higher than 100μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 5V. You should attach at least 2.7V voltage if you are using dual power supply. In order to operate the 4 inputs, there are several steps to follow.
DG611AEQ-T1-E3 Features
Switch Circuit: SPST - NC
1μA Supply Current
-3db Bandwidth: 720MHz
DG611AEQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG611AEQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Communications systems
- Routers
- DSLAMs
- Battery-powered systems
- Ultrasound
- Signal routing between systems
- Microprocessor Controlled Analog Systems
- Medical Instrumentation
- DVD-R
